Flaps
Chapter 4.4
Flaps
The flaps are moving components of the wing. They are generally attached to the trailing edge of the wing. Their function is to increase lift. They also create more drag.
Effects of Flaps
A variation in the position of the flaps causes:
- A variation in lift
- A variation in drag
Effects of Flaps
The deployment of flaps causes:
- A reduction in take-off distance
- A reduction in landing distance
- A lower V STALL
Side effects due to Variations in Flap Position
Each variation in the position of the flaps causes a variation about the pitch axis which is more or less pronounced.
In a stabilized attitude and without correction, the extension of flaps produces a climbing effect / BALLOONING.
In a stabilized attitude and without correction, the retraction of flaps result in a descent.
The Presentation of the Zone of Use of the Flaps on the ASI
Maximum Speed
The upper end of the white arc indicates, for the type of aircraft, the maximum speed for the deployment of the flaps or for the flight with the flaps completely extended.
This speed is called V MAX FE. By exceeding this airspeed, the flaps or their steering system may be dangerously damaged by this overload.
For high-speed operations, flaps must be taken into account for the load factor (values in the AFM).
The Presentation of the Zone of Use of the Flaps on the ASI
Minimum speeds
The lower end of the white arc indicates for the aircraft type the minimum speed for flight with flaps extended at the maximum take-off weight. This speed is called V MIN FE.
The white area for a flight with flaps extended is lower than the green area for a flight without flaps. At low speeds the aircraft is still in a flyable
condition thanks to the additional lift due to the flaps being extended. If at this moment the flaps are retracted, the airplane enters a stall.
Not all ASIS have a white arc. The maximum and minimum speeds for flap retraction and extention depend on the mass. They are described in the AFM and in other documents.